Manufacturer and suppliers of Induction melting furnace, Induction melting of copper, Induction furnace, Aluminum
melting furnace, Metal, Silver & Gold melting furnace, Ancillary equipments
INDUCTION MELTING FURNACES
Our Products
Induction Melting Of Brass
 |
 |
| INDUCTION MELTING FURNACE FOR THE MELTING OF BRASS | |||
| AVAILABLE CAPACITY: IN KGS: |
25 KGS TO 3 TONS | ||
| IN KW: | 15 KW TO 1000 KW | ||
| UNIT CONSUMPTION IN MANGALENZ INDUCTION MELTING FURNACE @NORMAL CONDITIONS: *IN ACTUAL RUNING CONDITION: |
270 KWH/TON TO 310 KWH/TON OF BRASS MELTING |
||
| POURING TEMP FOR BRASS : | 1000C TO 11500C | ||
| WHICH TYPE OF MAT. CAN MELT IN THE MAGNALENZ INDUCTION MELTING FURNACES: | 1. ASSORTED SCRAP OF BRASS. 2. ALLOYING WITH COPPER SCRAP & ZINK. 3. COPPER INGOT WITH ZINK ALLOYING. 4. BRASS INGOT. 5. BRASS CHIPS 100%. |
||
| RECOMMENEDED LINING FOR BRASS MELTING : | 1. ACIDIC (SILICA LINING WITH 1% TO 2.5% BORIC ACID.) 2. NEUTRAL. *SHOULD HAVE EXCELLENT RESISTANCE TO CHEMICAL, THERMAL AND MECHANICAL DAMAGE, WITH A LOWER SINTERING TEMP. TO SUIT TO BRASS MELTING. |
||
| APPROX REQUIRED COMPONENTS IN PERCENTAGE PRESENT IN LING MAT. FOR. BRASS MELTING IN INDUCTION FURNACE: |
% | ||
| AL2O3 | < 0.2 | ||
| SIO2 | 97 |
||
| CAO | < 0.5 |
||
| FE2O3 | < 1.0 |
||
| MAX. GRAIN SIZE/MM | 4 | ||
| BONDING | CERAMIC | ||
| SERVICE TEMP: | 15500C TO 16000C | ||
FORMER MATERIALS: |
1. CASTED BRASS |
||
RECOMMENEDED CHURING (STIRRING): BASED ON |
BRASS: |
0.07 TO 0.15 |
|
MODERAT CHURNING/STIRING IS ADVICABLE IN ANY CASE, FOR LOW LOSS OF BRASS, WHILE MELTING IN INDUCTION FURNACE: |
|||
copyright2011©Magnalenzindia.com
Design & Developed by Cipherinfotech