Manufacturer and suppliers of Induction melting furnace, Induction melting of copper, Induction furnace, Aluminum
melting furnace, Metal, Silver & Gold melting furnace, Ancillary equipments
INDUCTION MELTING FURNACES
Our Products
Aluminum Melting
 |
 |
| INDUCTION MELTING FURNACE FOR THE MELTING OF ALUMINUM | ||
| AVAILABLE CAPACITY: IN KGS: |
50 KGS TO 3 TONS | |
IN KW: |
20 KW TO 1500 KW | |
| UNIT CONSUMPTION IN MANGALENZ INDUCTION MELTING FURNACE @NORMAL CONDITIONS: *IN ACTUAL RUNING CONDITION: |
500 KWH/TON TO 550 KWH/TON OF ALUMINUM MELTING |
|
| POURING TEMP FOR ALU. : | 6600C TO 7200C (MAX) | |
| WHICH TYPE OF MAT. CAN MELT IN THE MAGNALENZ INDUCTION MELTING FURNACES: | 1. ALUMINUM SCRAP OF WIRES/CABLES/STRIPS ETC. 2. ALUMINUM SWARF/ CHIPS/ TURNINGS. 3. ALUMINUM TINS (PREFERABLY BAIL COMPRESSED) 4. ALUMINUM FOILS (-------------------DO------------------) 5. ALUMINUM UTENSIL ETC. |
|
| RECOMMENEDED LINING FOR ALUMINUM MELTING | 1. HIGH ALUMINA. 2. NEUTRAL. 3. ACIDIC. SHOULD HAVE EXCELLENT RESISTANCE TO CHEMICAL, THERMAL AND MECHANICAL DAMAGE, WITH A LOWER SINTERING TEMP. TO SUIT TO ALU. & ALU. MELTING. |
|
| APPROX REQUIRED COMPONENTS IN PERCENTAGE PRESENT IN LING MAT. FOR. ALU. MELTING IN INDUCTION FURNACE: |
% | |
| AL2O3 | 59 TO 62 | |
| SIO2 | 35 TO 62 | |
| MGO | 0 TO 0.5 | |
| CAO | 0.5 | |
| FE2O3 | 0.8 TO 0.9 | |
| MAX. GRAIN SIZE/MM | 3 TO 5 | |
| BONDING | CERAMIC | |
| SERVICE TEMP: | 8000C TO 16000C | |
| FORMER MATERIALS: | 1. ALUMINIUM SHEET FORMER 2. REMOVABLE M.S. FORMER |
|
| RECOMMENEDED CHURING (STIRRING): BASED ON H/D RATIO IN INDUCTION MLETING FURNACE FOR ALU. MELTING |
0.035 TO 0.5
|
|
| MODERAT CHURNING/STIRING IS ADVICABLE IN ANY CASE, FOR LOW LOSS OF ALUMINUM, WHILE MELTING IN INDUCTION FURNACE: | ||
copyright2011©Magnalenzindia.com
Design & Developed by Cipherinfotech